10C28Mo2 is a recent development from Sandvik. Designed to be a step up from 14C28N it was designed with a focus on knife specific demands with corrosion resistance in particular. The very fine microstructure provides a great combination of hardness, edge retention, toughness, and ease of use. This makes 10C28Mo2 a great choice for outdoor knifes, professional kitchen/butchers knifes, fishing knives or knives that require increased corrosion resistance
Chemical Composition:-
|
C:
|
Cr:
|
Mn:
|
Mo:
|
N:
|
Si:
|
|
0.53%
|
14%
|
0.7%
|
1%
|
0.08%
|
0.4%
|
Suggested Heat Treatments:
Heat to 1050C (Hold for 6 minutes for 3mm, 12 minutes for 4mm)
Air or Oil Quench (Suggested Oil is Rye 32)
Optional – Cool to -70C
Temper twice for two hours at 175C for 60/61HRc or 225C for 58HRc
Supplied Cold Rolled Annealed in 600mm Lengths