1075+Cr is a carbon steel which is a good choice for beginners due to an easier heat treatment. It is a tough steel so would be suited to larger blades.
Chemical Composition:-
C:
|
Cr:
|
Mn:
|
P:
|
S:
|
Si:
|
0.7 – 0.8%
|
0.3 – 0.4%
|
0.6 – 0.8%
|
0.01%
|
0.025%
|
0.25 – 0.5%
|
Suggested Heat Treatment:
Heat to 830 – 860C (No holding time required)
Oil Quench (Suggested oil is Rye 32)
Temper for one hour at 260C for 60HRc or
Temper for one hour at 200C for 58HRc
Supplied in 500mm Lengths - Hot Rolled Annealed