CPM-10V is an extremely high wear resistant tool steel. It is heat treatable up to 64-65HRc. Produced using the Crucible Powder Metallurgy Process (CPM) it produces a very fine grained, clean steel. Great for those looking for an extremly wear resitant steel with long periods between sharpening.
Chemical Composition:-
|
C:
|
Cr:
|
Mo:
|
V:
|
|
2.45%
|
5.25%
|
1.3%
|
9.75%
|
Suggested Heat Treatments:
Heat to 1065C Hold for 30 minutes
Air Quench
Temper twice for two hours at 540C for 60.5HRc
Supplied in 595mm Lengths – Surface Ground Annealed