Skip to main content
Submit Request Quote
 * Denotes Required Field.
Name:
 *
Company Name:
Phone:
Email:
 *
Message:
Request Quote
 

26C3 Full Plates

26C3 is a high carbon, very clean, fine grained steel, capable of high hardness and holding very fine edges which makes this steel suited to kitchen knives, razors etc where extreme wear resistance is not always needed. 26C3 is also capable of producing some very fine hamons to! It can be water quenched but we do advise using Rye 50 to minimise the risk of cracks or failure as it can be as hard as 68HRc as quenched. 

Chemical Spec:-

C: 1.22 - 1.29%

Cr: 0.2 - 0.4%

Mn: 0.3 - 0.5%

P: 0.020% Max

S: 0.010% Max

Si: 0.15 - 0.30%

 

Larrin Thomas of Knife Steel Nerds has an in depth article about 26C3 including a variety of heat treatments which can be found here:-

How to Heat Treat 26C3 Steel

 

Heat Treatment:-

Heat to 800° Centigrade and hold for 10 mins

Water or Oil Quench (We recommend our Rye 50 Oil)

Temper twice for two hours at 150° Centigrade for approx 65HRc or

Temper twice for two hours at 175° Centigrade for approx 64HRc

Supplied as a full plate - Cold Rolled and Annealed

Size: